Sanitary Stainless Steel SS316 Syrup Honey Pump Chocolate Pump Rotor Rotary Lobe Pump
Rotor pumps are designed for the food processing and cosmetics industries. Made of stainless material to ensure that transport does not pollute the medium. It is usually applied in Food and beverages, dairy products, latex, chocolate, syrups, cheese, wort, beer and soda; fruit concentrate, puddings, jams and ketchup; Paste products, oils and fats; Medicine, extractum, emulsion, pill, etc.
Specification:
Model in Our Company |
Sanitary rotor pump |
Motor Power |
0.55KW~4KW |
Rated Flow |
0.2~12T/H (3~200L/min) |
Working Temperature |
-10ºC~140ºC |
Inlet Diameter |
Φ25~Φ63(mm) |
Outlet Diameter |
Φ25~Φ63 (mm) |
Voltage |
AC220~240V, AC380~420V, 50/60Hz custom |
Motor |
ABB Motor |
Connection |
ISO ferrule joint, threaded union, flange |
Inner Surface |
Mirror polishing Ra0.4 |
Material |
AISI 304, AISI 316L |
Delivery Time |
About 7-15 days after deposit |
Working Principle of Rotary Lobe Pump:
The rotary lobe pumps, we also called them lobe rotor pumps. They are one popular transfer pump to conveying the food, beverage, pulp and paper, chemical, pharmaceutical and so on. The rotor lobe pump relies on two synchronously rotating rotors that generate suction (vacuum) at the inlet during the rotation. Thereby sucking in the material to be conveyed. Both rotors split the rotor chamber into different spaces. Then operate in the order of 1-2-3-4. The medium is delivered to the discharge port. In this cycle, the medium (material) is continuously transported out by the source.
1. Single Lobed Rotor: More suitable for conveying media which containing large granular materials. The breaking rate of large granular materials is low. But on other hand it is not popular one for used, Because its pulsation is large and pressure is low, also the volume is small for the space of transferred materials.
2. Two-Lobed Rotor (Butterfly Rotor) More suitable for conveying media which containing small and medium-size granular materials. The breaking rate to these materials is low and getting slightly pulsating. The volume is a little less than the three-lobed rotor for the space of transferred materials.
3. Three-Lobed Rotor It is widely used in one rotor. The volume is bigger than other type of rotors for the space of transferred materials. Also, each performance is higher than other rotors. Just, it has a certain rate of breakage to the particulate materials on the transport way.
4. Multi-Lobed Rotor(4-12) The volume is smaller for the space of transferred materials and breaking rate higher when the quantity of rotary vane of rotor be increased, Just the transport way more stable.
Character:
1,There Is A Certain Gap Between Rotor And Rotor, No Friction Coefficient, So Pump Have A Long Service Life Time.
2, It Is Easy To Install And Disassemble, And It Is Convenient To Maintain, clean . There Is Less Wearing Parts.
3, High Efficiency And Energy Saving, Stable Transportation, Low Failure Rate, No Leak Sealing And Low Noise.
4, The Viscosity Of The Transportable Medium Is, ≤2000000 CP, And The Pump Can Transfer Slurry Containing 70% Solids.
5, It Can Transport Gas, Liquid And Solid Three-Phase Mixture Materials.
6, With FD, The Flow Can Be Adjusted At Will, And The Pump Can Be Used As A General Metering Pump.
7, If you need, We Can Do The Pump With Heating Jacket.
8, Applicable Temperature: -50 °C, -250 °C.
9, Types Of Inlet/Outlet Connection: Flange Joint, Threaded Connection; Quick Connection.
10,Seal Type: Mechanical Seal And Packing Seal.
Lobe Pump Scope Of Application.
Dairy Products: Yogurt, Cream, Ice Cream, Cheese And Whey.
Beverages: Beer, Wort, Yeast, Soft Drinks, Fruit Concentrates, Fruit Drinks.
Food: Tomato Sauce, Vegetable Paste, Seasoning, Sweeteners, Yeast Paste, Salad, Meat Emulsion, Edible Oil.
Candy: Syrup, Cream Stuffing, Fruit Purée, Fruit Filling, Pudding, Jam, Jelly, Chocolate.
Cosmetics: Creams And Lotions, Hair Gels, Hair Dyes, Essential Oils.
Drugs: Pill, Extract, Emulsion, Paste.
Chemicals: Fats, Solvents, Resins And Polymers, dyes...
1.Do you provide OEM/ODM services ?
Yes, we have a professional team for product design, R&D, package design, quality control.
and provide one-stop-shop service for the products from designing, developing, prototyping, tooling, producing to shipping.
Our engineers have 5-15 years working experience to make solutions for you.
2. What about the lead time?
Usually it's about 15-20 days. We can expedite the time if necessary.
3. Do you accept customized package and logo?
Yes, Custom colors and labels require up to a thousand products
4.What is your payment terms?
We accept 30%T/T in advance,the balance should be paid in the period of shipment we also accept cash, L/C is available.
5. How can I get some samples?
We are willing to offer small qty of samples free of charge, but you are expected to afford the freight cost.
6.Can you mark the materials as our requirements?
Yes,we can mark as per customers's requirements if it is reasonable.
7.Can you provide us the testing report?
Yes,we can provide the required material report like material certificate,mill certificate,pressure testing report and roughness report ,measurement report,hardness report.etc.
8.Which port is the nearest port for shipment?
Ningbo port is preferred.Shanghai port is also close from our factory.